Standard configuration · quoted in CAD

When the order book is full, the machine is the constraint.

Bigger bed, double the power. Built for shops where the laser runs all day and stopping it costs more than owning it.
Illustration of an enclosed fiber laser cutting machine
HOW PRICING WORKS
Quoted per configuration (CAD)
Written quotes in Canadian dollars
This is a throughput purchase
If you’re reading this page you probably already own a laser, or you’ve outgrown one.
The question at 12 kW isn’t whether fiber cutting works. You know it works. The question is whether the machine can absorb your Q1 order book without you turning work away, subbing it out at someone else’s margin, or running a Saturday shift to catch up.
Against the 6 kW machine, two things change on paper: the laser power doubles and the price steps up. How much more you cut per shift depends on your material and your mix — so we don’t publish a speed multiplier here. We settle that on your parts. What the extra power and the bigger bed buy you:
Illustration of an enclosed laser machine with conveyor
Twice the laser power
12 kW against 6 kW is the difference this configuration is built around — more laser power on tap, plus the 6′ × 12′ bed to put it to work. What that buys on your specific material and thickness, we prove with a cut rather than a claim.
Throughput, proven on your part
Send us a representative part — or cut it yourself at our Lumby demo showroom — and see the cycle time on this machine before you commit. That answers the speed question better than any figure we could print.
Headroom
The capacity to say yes to a contract that would currently break your schedule.
Performance Review
We measure results, track KPIs, and adapt strategies. Outcome: impact you can quantify.
A 6′ × 12′ bed also means you’re buying standard oversize plate without a second setup or a weld seam where the customer can see it.
Where 12 kW is the wrong answer
If you’re cutting mostly thin sheet on a single shift, 12 kW is more machine than your work requires, and the 6 kW will do the job for a smaller cheque.
See the 6 kW · 5′×10′ →
Match the machine to the work. When the volume is genuinely there — thick plate, mixed materials, a bed that stays full — 12 kW earns its price. When it isn’t, the 6 kW is the smarter buy, and we’ll tell you so.
Rendering of welded steel machine bed sections

Specifications

Cutting area
6 ft × 12 ft nominal — 2,030 × 4,050 mm actual
Laser power
12 kW
Positioning accuracy
± 0.03 mm
Max positioning speed
140 m/min (≈ 450 ft/min)
Motion control
YASKAWA high-performance servos
Linear guides
Airtac 35 mm, black-chrome plated
Machine bed
12 mm welded steel, stress-relieved, FEA-verified
Dust extraction
Specified per configuration
Materials
Mild steel · stainless · aluminum · copper · brass · titanium
CAD/CAM
DWG · DXF · industry-standard formats
Built for duty cycle: stress-relieved welded steel bed · refractory brick scrap cart · continuous felt-wheel rack lubrication · fireproof brick thermal shielding. Specified for three-shift production.
See the full fiber cutting platform, 3–60 kW →
IN ACTION

See the Vantix fiber cutting platform run

Representative footage from the Vantix fiber cutting line — the same motion system, edge quality and dust control this 12 kW machine ships with. Your own parts and cycle times we prove on a sample cut, not a video.

What backs this machine, whatever the configuration

This is the part Bodor and Trumpf don’t put on the table: 48-hour on-site service across Western Canada, spare parts stocked in Lumby BC, a 2-year warranty, a 24/7 Canadian hotline staffed by people who know the machine, and a Lumby demo showroom where you cut your own material before you buy. On a machine this size the support package isn’t a bonus — it’s the product. A 12 kW machine that isn’t running is the most expensive object in your building.

Illustration of printed cards with warranty wording
2-year warranty
on the full system
Written quote
your exact configuration, in CAD
5 days of on-site training
your operators, your shop, your parts
48-hour on-site service response
Western Canada
24/7 Canadian phone support
Canadian hotline, any hour
One year of spare parts stocked in Lumby
not shipped from overseas

The proof you should demand

It’s a better basis for a capital decision than any spec table — cut time, edge quality and tolerance, measured on your own part.
Send us your worst part.
Not your easiest one. The thick plate with the tight tolerance, or the stainless where the edge finish gets rejected. We’ll cut it on a 12 kW and ship it back with the parameters we used — or you run it yourself at our Lumby demo showroom. That’s how we settle the throughput question: on your material, not in a spec line.

How a Vantix quote works Written for your configuration, not a catalogue.

Written quote in Canadian dollars → delivery on your schedule.
Quote
Written, in Canadian dollars
Price
Quoted per configuration (CAD)
Build time
Confirmed with your quote
Delivery
Scheduled around your shop
Ask for the current build slot when you request your quote.
If your capital approval runs on a board or a bank timeline, the written quote is the document you take to them, with your configuration priced in Canadian dollars. Ask for it now even if the decision is months out — that costs you nothing, and the validity period is written on the quote itself.
Objections, answered straight
“We’re mid-way through capital planning for next year.”
That’s the normal case. Get the written quote now, present it to the board, and order when it’s approved; the validity period is written on the quote itself.
“How do I know a 12 kW from a newer brand keeps up with an established one?”
You don’t, from a website. Send us the part. Then compare the edge, the tolerance and the cycle time against the machine you’re benchmarking. That’s the only comparison that survives contact with the shop floor.
“What’s your service response when it’s down and I’m running three shifts?”
48-hour on-site across Western Canada, a 24/7 Canadian hotline, and a year of spares held in Lumby. Ask us what our current parts-on-hand list looks like — we’ll send it.
“Is the price coming out of the build quality?”
No. Every configuration gets the same build and the same support; the configuration sets the price, and the quote puts it in writing.
“We need a bigger bed than 6′ × 12′.”
We configure up to 12′ × 60′. That’s outside the standard configurations, but tell us the sheet size and we’ll quote it.
Get a written quote for this configuration

Quoted per configuration in Canadian dollars.

Get the number in writing. Decide on your schedule.
Feel free to reach out via email if you have any questions before our call!
You can reach out to us by phone to discuss your needs.
1431 Dyffryn Road, Lumby, BC
We are located in BC.
All standard configurations
Laser machine sale →
6 kW · 5′ × 10′ fiber laser cutting table
View →
1.5 kW handheld laser welder
View →
Vantix Laser Canada · 1431 Dyffryn Road, Lumby, BC V0E 2G0 · 778-907-9796
All machines are quoted per configuration in Canadian dollars. Custom and non-standard configurations quoted separately.